Wireless open/closed sensors provide information on the status of doors, windows, cabinets, etc. Know if a building or area is being accessed when it should not be, or if a door or window has been left open. Alerts can be setup to notify a user by SMS text, email or voice call if a door or window has been opened or left open. Know if a cooler or freezer door is left open.

  • Leading Enterprise Grade "Internet of Things" Solutions
  • Sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,200+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allow these sensors to have better interference immunity from other wireless devices.
  • Superior power management provides sensors with almost twice the battery life of standard wireless sensors.
  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 12+ years.

Our products employ new Encrypt-RF® Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow products to be updated remotely if new fixes or features become available.


 

Product Features

  • Sense immediate door or window access.
  • Sense if a door, window, drawer is opened or has been left open
  • Monitor access to specific areas of buildings.

 

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other

Contact Sensor - Open / Close

SKU: OCL-C-01
$80.00Price
  • Magnetic Sensor Specifications

    • Switch Cycles    50 million
    • Operation Gap    Up to 3/4 inch
    • Magnet    Alnico
    • Magnet Case Construction    Weatherproof, high-impact ABS plastic with self-adhesive backing
    • Magnet Temperature Range    -15°F to 160°F (-25°C to 70°C)
    • Wire Leads    22 gauge / 13.5 in length (+/- 1.5 in)

     
    Coin Cell Specifications

    • Battery Type    Replaceable 3.0V (CR2032) Coin Cell Battery
    • Dimension    2.0 in x 1.125 in x 0.875 in
    • Max Operating Temperature    -7°C to +60°C ( 20°F to +140°F )
    • Optimal Battery Operating Temperature (Coin Cell)    +10°C to +50°C ( +50°F to +122°F )
    • Supply Voltage    2.0 - 3.8 VDC
    • Battery Life    At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
    • Enclosure Technology    Monnit PinchPower™ Wireless Sensor Enclosures
    • Enclosure Material    ABS

     
    900 MHz Specifications

    • Operating Frequency    900 MHz Operating Frequency
    • Certifications    Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
    • Complies with Industry Canada standards. (IC: 9794A-G2SC1)
    • Device Range    Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*
    • Security    Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)
    • Sensor Magnet with Mounting Flange
    • Wireless Sensor
    • Mounting Hardware
    • Coin Cell CR2032 Battery

AIMNET Smart-Building Systems

263 Boston Post Road

Orange, CT 06477

203-272-1242
  • Facebook

© 2008 to 2020 by AIMNET   Proud innovators of Smart-Building automation and technology